Rosewill WIRELESS N ADAPTER RNX-N150UBE Uživatelská příručka Strana 19

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 83
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 18
STEP 4. CONNECT TO THE NETWORK
groov Box Users Guide
12
For mounting on a DIN rail:
a. Using the screws provided, install the DIN rail clip on the back of the groov Box.
b. Attach the groov Box to the DIN rail.
Step 4. Connect to the Network
a. Connect an Ethernet cable from ETH0 to your computer’s network.
NOTE: Opto 22 recommends connecting ETH0 to a network with DHCP and DNS services. If you do not
have these services, you’ll need to manually configure networking.
b. The two independent Ethernet connectors (ETH0 and ETH1) have separate IP addresses that
can be used to segment a control systems network from the enterprise LAN. If your Opto 22
DIN rail clip
ETH0 to computer network
ETH1 to control network
(if on a separate subnet)
Zobrazit stránku 18
1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 82 83

Komentáře k této Příručce

Žádné komentáře